Unitech MS837 User Manual

*
Do Not Convert EAN-8 to EAN-13
*
Transmit UPC-A Number System
Do Not Transmit UPC-A Number System
*
Transmit UPC-A MFR #
Do Not Transmit UPC-A MFR #
*
Transmit UPC-A ITEM #
Do Not Transmit UPC-A ITEM #
*
Transmit EAN-8 Check Digit
Do Not Transmit EAN-8 Check Digit
* Transmit EAN-13 Check Digits - The scanner will transmit EAN-13
Check Digit.
Do Not Transmit EAN-13 Check Digit.
Codabar Formatting
Transmit Codabar Start/Stop Characters - Transmits Codabar’s
Start/stop characters before and after each bar code.
*
Do Not Transmit Codabar Start/Stop
*
Normal Codabar Start/Stop Characters
Enable Transmit Codabar Start/Stop Characters as Lower Case
Character
Enable CLSI Editing - Works only with 14 digit Codabar type lengths.
This option will perform CLSI type editing before the information is
transmitted to the host.
*
Do Not Enable CLSI Editing
34
Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.

Unitech MS837 Specifications

General

Brand	Unitech
Model	MS837
Category	Scanner
Language	English