48
Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Ignore BEL/CAN in ACK/NAK – Ignore BEL/CAN characters in
communication loop.
Enable 5 Retries on ACK/NAK Time Out – Allow up to 5 NAK
retransmissions of the data before dropping out of the communications
loop.
Disable 5 Retries on ACK/NAK Time Out
Enable 5 NAK Retries
Allow up to 5 retransmissions of the data if a NAK is received.
Disable 5 NAK Retries
Enable GLS Handshaking – Accept ]V for the ACK acknowledgement.
ACK will no longer be accepted but NAK and any additional ACK/NAK
protocol characters enabled are still accepted.
Disable GLS Handshaking
Miscellaneous
Enable French PC Term – The scanner transmits PC type make/break
scan codes instead of ASCII data characters. The scan codes match a
WYSE French PC Term.
Disable French PC Term
Enable NCR Scanner – Only Commands
Disable NCR Scanner – Only Commands
To Next Page
Loading...
