Unitronics Vision 260 User Manual

Preface
iii
Warnings and Safety Guidelines
Guidelines for user safety and equipment protection
This manual is intended to aid trained and competent personnel in the installation of this
equipment as defined by the European directives for machinery, low voltage, and EMC. Only
a technician or engineer trained in the local and national electrical standards should perform
tasks associated with the electrical wiring of this device.
Symbols are used to highlight information relating to the user’s personal safety and protection
of the equipment throughout this manual.
When any of the following symbols appear, the associated information must be read carefully
and understood fully.
Danger Symbols
Symbol Meaning Description
Titl
Danger
The identified danger
causes physical and
property damage.
Warning
The identified danger
could cause physical
and property damage.
Caution
Caution
Use caution.

Unitronics Vision 260 Specifications

General

Brand	Unitronics
Model	Vision 260
Category	Controller
Language	English