Universal Robots CB Series User Manual

19.6. Single Step in a Program
Description Single Step allows the current program to be exectued one node at a time, when the
robot is in Manual mode.
(See Operational modeon page134).
This is useful when you are checking your program for errors.
Single Step Single Step allows the selected program node to run, then pauses at the beginning of a
new node.
Single Step can only be used when the current program is paused.
If you want to use Single Step on a specific node, the node must also support
Breakpoints.
User Manual 193 UR10e
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.

Universal Robots CB Series Specifications

General

Brand	Universal Robots
Model	CB Series
Category	Robotics
Language	English