Time
Description You can access and/or adjust the current time and date displayed on the PolyScope.
Time
1. In the Header, tap the Hamburger menu icon and select Settings.
2. Under Preferences, select Time.
3. Verify and/or adjust Time and/or Date as desired.
4. Tap Apply and Restart to apply your changes.
Date and Time are displayed in the Log tab (see Date Logon page325) under Date
Log.
25.2.2. Password
Description Password contain the management of passwords and administrator's password.
Password Settings
Setting a
Password
You must set a password to Unlock all safety settings that make up your Safety
Configuration. If no safety password is applied, you are prompted to set it up.
To set a
Password
1. In your PolyScope header right corner, press the Hamburger menu and select
Settings.
2. On the left of the screen, in the blue menu, press Password and select Safety.
3. In New password, type a password.
4. Now, in Confirm new password, type the same password and press Apply.
5. In the bottom left of the blue menu, press Exit to return to previous screen.
You can press the Lock tab to lock all Safety settings again or simply navigate to a
screen outside of the Safety menu.
Administrator Password
User Manual 337 UR10e
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
