20.13.1. Feature Edit
Description The Feature Edit is an alternative way to add features to your installation and/or edit
existing features.
Use Edit to place and move features without moving the robot arm, so the feature can
be placed outside of the robot arm's reach.
Editing a Point You can edit a defined point or an undefined point. Editing an undefined point defines it.
1. In Installation, tap Features.
2. Under Features, select Point to add a point to your program tree.
3. Tap Edit to access the Edit screen to make changes to the position and rotation
of the point
UR10e 306 User Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
