Universal Robots CB Series User Manual

25.2. Settings
To personalize
PolyScope
settings
1. In the Header, tap the Hamburger menu and select Settings.
2. In the Side Menu on the left, select an item to personalize. If an operational mode
password was set, in the Side Menu, System is only available to the
programmer.
3. On the bottom right, tap Apply and Restart to implement your changes.
4. On the bottom left, tap Exit to close Settings screen without changes.
25.2.1. Preferences
Description Preferences contain the most basic settings, and would probably only be set once at
first start up.
Languages
Description You can change the PolyScope language and measurement unit (Metric or Imperial).
Run Screen
Description Located at the base of the Run tab screen, the Speed Slider allows the operator to
change the speed of a running Program.
To hide the
Speed Slider
1. In the Header, tap the Hamburger menu icon and select Settings.
2. Under Preferences, tap Run Screen.
3. Select check box to show or hide Speed Slider.
UR10e 336 User Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.

Universal Robots CB Series Specifications

General

Brand	Universal Robots
Model	CB Series
Category	Robotics
Language	English