Save... Save... proposes three options. Depending on the program/installation you load-create,
you can:
•
Save All to save the current Program and Installation immediately, without the
system prompting to save to a different location or different name. If no changes
are made to the Program or Installation, the Save All... button appears
deactivated.
•
Save Program As... to change the new Program name and location. The current
Installation is also saved, with the existing name and location.
•
Save Installation As... to change the new Installation name and location. The
current Program is saved, with the existing name and location.
User Manual 331 UR10e
24.Program and Installation Manager
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
