Universal Robots ur3 Service Manual

C158A1 (shoulder). The user
specified payload is
0kg, please make
sure this is correct.
Specifying an incorrect
payload mass and/or center
of gravity may cause poor
robot performance and/or
protective stops.
Make sure the specified
payload mass and center of
gravity are correctly
specified.
C158A2 (elbow). The user
specified payload is
0kg, please make
sure this is correct.
Specifying an incorrect
payload mass and/or center
of gravity may cause poor
robot performance and/or
protective stops.
Make sure the specified
payload mass and center of
gravity are correctly
specified.
C158A3 (wrist 1). The user
specified payload is
0kg, please make
sure this is correct.
Specifying an incorrect
payload mass and/or center
of gravity may cause poor
robot performance and/or
protective stops.
Make sure the specified
payload mass and center of
gravity are correctly
specified.
C158A4 (wrist 2). The user
specified payload is
0kg, please make
sure this is correct.
Specifying an incorrect
payload mass and/or center
of gravity may cause poor
robot performance and/or
protective stops.
Make sure the specified
payload mass and center of
gravity are correctly
specified.
C158A5 (wrist 3). The user
specified payload is
0kg, please make
sure this is correct.
Specifying an incorrect
payload mass and/or center
of gravity may cause poor
robot performance and/or
protective stops.
Make sure the specified
payload mass and center of
gravity are correctly
specified.
C159A Protective Stop:
Position deviates
from path
C159A0 (base). The user
specified payload is
0kg, please make
sure this is correct.
Specifying an incorrect
payload mass and/or center
of gravity may cause poor
robot performance and/or
protective stops.
Make sure the specified
payload mass and center of
gravity are correctly
specified.
C159A1 (shoulder). The user
specified payload is
0kg, please make
sure this is correct.
Specifying an incorrect
payload mass and/or center
of gravity may cause poor
robot performance and/or
protective stops.
Make sure the specified
payload mass and center of
gravity are correctly
specified.
C159A2 (elbow). The user
specified payload is
0kg, please make
sure this is correct.
Specifying an incorrect
payload mass and/or center
of gravity may cause poor
robot performance and/or
protective stops.
Make sure the specified
payload mass and center of
gravity are correctly
specified.
UR3 118 Service Manual
7.Troubleshooting
Copyright © 2009–2021 by UniversalRobotsA/S. All rights reserved.

Universal Robots ur3 Specifications

General

Brand	Universal Robots
Model	ur3
Category	Robotics
Language	English