• Connect the elbow and lower arm –
please see Service manual for full
details how this is done.
• The small grommet now need to be
pressed onto the bracket.
Upper arm – part number: 103509
NOTE
The lower arm wire bundle kit contains wire bundle for multiple robot types.
Please be sure use the correct length.
• Slide the wire bundle through the upper
arm with the two red cable shoes
towards the small diameter end of the
upper arm.
UR3 60 Service Manual
5.Service and Replacement of Parts
Copyright © 2009–2021 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
