User Manual
Your Trustworthy Industrial IoT Partner www.pusr.com
Fig. 33 Changing network settings
3.2.3. Reboot the device
This function is available to allow you to reset the gateway. The function disconnects both the ethernet and serial connections. The
function also allows the gateway to save new configuration settings to flash memory. To reset the device:
1. Right-click a desired device to display the settings menu.
2. Select Reboot.
Press the Reboot button and the system will give a reset response.
Fig. 34 Reboot the device
3.2.4. Restore to factory default settings
The configuration utility provides the function to restore the gateway to factory default settings. If you really want to restore the
gateway to factory default settings, please click restore factory button to continue. As shown in Fig.34.
To Next Page
Loading...