User Manual
Your Trustworthy Industrial IoT Partner www.pusr.com
Fig. 97 Serial printer setting wizard 1
Fig. 98 Serial printer setting wizard 1
7.7. NTP
If M100 is connected to the internet or to a local NTP server, the Date/time can be set automatically by enable NTP function. If this
option is chosen, the default value “cn.ntp.org.cn” should be shown in the NTP server field. User can select a proper Time Zone from
the dropdown box. If the M100 device is connected to the Internet and should get NTP server over the Internet, you will need to
To Next Page
Loading...