USR IOT USR-M100 - MQTT Gateway

User Manual
Your Trustworthy Industrial IoT Partner www.pusr.com
71
configure the DNS server in order to be able to resolve the host name of the NTP server.
Fig. 99 NTP settings
7.8. SNMP
The Simple Network Management Protocol (SNMP) is used by network management software to monitor devices in a network,
to retrieve network status information of the devices, and to configure network parameters of the devices.
To make the device’s information available for public viewing/editing, you can enable the SNMP function by checking the Enable box.
The supported SNMP Version:v1/v2c.The default SNMP Community Strings (or passphrases) is “admin”.
Fig. 100 Enable SNMP agent
Table 21 PUSR OID list
Item
OID
IP address
.1.3.6.1.2.1.4.20.1.1.172.16.14.12
Subnet mask
.1.3.6.1.2.1.4.20.1.3.172.16.14.12
Gateway
.1.3.6.1.2.1.4.21.1.1.172.16.14.12