User Manual
Your Trustworthy Industrial IoT Partner www.pusr.com
Fig. 91 Registration packet method
7.4. Socket B
Socket B supports TCP Client and UDP Client. Socket B and Socket A share the registration packet and heartbeat packet. When
Socket B initiates a connection, it uses a random local port number to connect to the target server.
Fig. 92 Socket B operating mode
7.5. Rs485 bus detection
If RS485 bus is in the receiving state, M100 can not output data to serial port to achieve the 485 bus anti-conflict function.
Idle time: the interval time when M100 is allowed to send data to RS485 bus after the receiver is idle. The value ranges from 0 to
65535 (ms). Default value: 10. This parameter is mandatory.
To Next Page
Loading...
General