User Manual
Your Trustworthy Industrial IoT Partner www.pusr.com
Fig. 56 VCOM overview
5.1. TCP Server Application with Virtual COM
Virtual COM on host computer allows remote access of serial devices over TCP/IP networks through Serial/IP Virtual COM
ports that work like local native COM ports. This section will provide the procedure to enable Virtual COM (VCOM) on Windows based
PC. Please follow the steps described here to configure your Virtual COM application.
1. If the gateway is running in TCP Server Mode (recommended), the VCOM utility on the host computer should be configured as the
TCP client connecting to the gateway. The characteristic of this mode is that the IP address of the host can be changed (usually
automatically assigned by the router), and the IP address of the gateway must be fixed.
Fig. 57 TCP server mode in USR-M100
To Next Page
Loading...