EasyManuals Logo

Utax CD 1018 User Manual

Utax CD 1018
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
2GM
1-4-15
Maintenance
Description
item No.
U425 Setting the target
Description
When running U411 “Adjusting the scanner automatically, input the color data value of the specified patch
written in the LAB value table on the back side of the original for adjustment (P/N: 2A668011). Note that
incorrect value input results in improper automatic adjustment.
Purpose
To run before running U411 “Adjusting the scanner automatically.
Method
Press the enter key. A selection item appears.
Setting
1. Select the item to be set using the up/down cursor keys.
2. Change the setting using the left/right cursor keys or keypad.
* Input the values written in the LAB value table on the back side of the original.
Display Description Setting range
N8.75(L*) Black N8.75 (L*) target 0.0 to +100.0
N8.75(a*) Black N8.75 (a*) target –200.0 to +200.0
N8.75(b*) Black N8.75 (b*) target –200.0 to +200.0
N4.75(L*) Black N4.75 (L*) target 0.0 to +100.0
N4.75(a*) Black N4.75 (a*) target –200.0 to +200.0
N4.75(b*) Black N4.75 (b*) target –200.0 to +200.0
N1.25(L*) Black N1.25 (L*) target 0.0 to +100.0
N1.25(a*) Black N1.25 (a*) target –200.0 to +200.0
N1.25(b*) Black N1.25 (b*) target –200.0 to +200.0
C(L*) Cyan (L*) target 0.0 to +100.0
C(a*) Cyan (a*) target –200.0 to +200.0
C(b*) Cyan (b*) target –200.0 to +200.0
M(L*) Magenta (L*) target 0.0 to +100.0
M(a*) Magenta (a*) target –200.0 to +200.0
M(b*) Magenta (b*) target –200.0 to +200.0
Y(L*) Yellow (L*) target 0.0 to +100.0
Y(a*) Yellow (a*) target –200.0 to +200.0
Y(b*) Yellow (b*) target –200.0 to +200.0
R(L*) Red (L*) target 0.0 to +100.0
R(a*) Red (a*) target –200.0 to +200.0
R(b*) Red (b*) target –200.0 to +200.0
G(L*) Green (L*) target 0.0 to +100.0
G(a*) Green (a*) target –200.0 to +200.0
G(b*) Green (b*) target –200.0 to +200.0
B(L*) Blue (L*) target 0.0 to +100.0
B(a*) Blue (a*) target –200.0 to +200.0
B(b*) Blue (b*) target –200.0 to +200.0
3. Press the enter key. The value is set.
Completion
Press the back key. The indication for selecting a maintenance item No. appears.

Table of Contents

Other manuals for Utax CD 1018

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utax CD 1018 and is the answer not in the manual?

Utax CD 1018 Specifications

General IconGeneral
BrandUtax
ModelCD 1018
CategoryAll in One Printer
LanguageEnglish

Related product manuals