2GM
1-4-17
Maintenance
Description
item No.
U927 Clearing accounting counter
Description
Clears the total count, scanner count and machine life count. The counts, however, can be cleared only one
time. If either of the total count, canner count or machine life count exceeds 1,000, this mode cannot be run.
Purpose
To start the counters with value 0 when installing the machine.
Method
1. Press the enter key. A selection item appears.
2. Select Execute using the up/down cursor keys.
* If the counter has been cleared, Execute is not displayed.
3. Press the enter key. The accounting counter is cleared.
Completion
Press the back key. The indication for selecting a maintenance item No. appears.
U928 Checking the machine life count
Description
Displays the machine life count for checking a figure.
Purpose
To check machine status.
Method
Press the enter key. The machine life count will be displayed
Completion
Press the back key. The indication for selecting a maintenance item No. appears.
To Next Page
Loading...
Need help?
General
