2GM
1-4-23
Service items Description
Items Description
1 Destination information 1: For Europe/Australia/New Zealand
2: For America/Canada/South America
3: For Europe/Middle East/Asia
17/18/19/21: OEM
2 Area information 1: Europe
2: North America
3: Asia (except Chine)
4: Japan
5: Australia
6: China
3 Printable area Legth/Width
4 Offset for each paper source MP tray top offset/MP tray left offset/Optional drawer
top offset/Optional drawer left offset
5 Margin Top margin/Left margin
6 Operation panel key lock status 0: Off
1: Partial lock (cancelling job is available)
2: Full lock (displayed only)
7 USB information 0: Not installed
1: Full speed
2: Hi-speed
8 Engine information Monochirome AGC offset odd result, Monochirome
(Hexadecimal) AGC offset odd setting value, Monochirome AGC
offset even result, Monochirome AGC offset even
setting value/
Monochirome AGC gain odd result, Monochirome
AGC gain odd setting value, Monochirome AGC gain
even result, Monochirome AGC gain even setting
value/
Color AGC offset red result, Color AGC offset red
setting value, Color AGC offset green result, Color
AGC offset green setting value, Color AGC offset
blue result, Color AGC offset blue setting value/
Color AGC gain red result, Color AGC gain red
setting value, Color AGC gain green result, Color
AGC gain green setting value, Color AGC gain blue,
Color AGC gain blue setting value/
Lamp stabilization parameter A, B, C/
Toner installation mode/
9 Maintenance information
(Hexadecimal)
No. Data Description
1 Amount of slack in the paper: Drawer
2 MP tray
3 Optional drawer
4 Shading position
5 Scanner magnification
6 Print start timing
7 DP magnification
8 DP scanning timing: Leading edge
9 Trailing edge
10 Other high voltages: Developing bias clock frequency
11 Developing bias clock frequency
12 Transfer charging output OFF timing
13 Transfer charging output ON timing
14 Developing bias clock frequency
15 Developing bias clock duty
To Next Page
Loading...
Need help?
General
