Vacon 100 X - Battery Installation for Real Time Clock (RTC)

5
vacon • 53 Control unit
5.3 Battery installation for Real Time Clock (RTC)
Enabling the functions of the Real Time Clock (RTC) requires that an optional battery is installed
in the VACON
®
100 X drive.
Detailed information on the functions of the
Real Time Clock (RTC) can be found in the Application
Manual. See the following figures to install the battery on the control box of Vacon
®
100X frequency
converter.
Figure 36. Remove the three screws on the control box.
1
Remove the three screws on the control box as shown in Figure 36.
2
Rotate and open the cover of the control box as shown in Figure 37.