Vacon 100 X - Control Keypad; Mounting Onto the Drive

Options vacon • 76
Service support: find your nearest Vacon service center at www.vacon.com
8
8.2 Control Keypad
The control keypad is the interface between the VACON
®
100 X frequency converter and the user.
With the control keypad it is possible to control the speed of a motor, to supervise the state of the
equipment and to set the frequency converter's parameters.
The keypad is an option and can be delivered separately. The option includes the keypad, the keypad
holder and three screws. You can use one screw to fix the keypad holder to the drive or three screws
to fix the keypad holder to an enclosure/cabinet or any special housing for the drive in which you
want to have a remote keypad control available.
8.2.1 Mounting onto the drive
Figure 52. Drive and the optional keypad kit.