Vacon 100 X - Page 62

6
vacon • 59 Commissioning
Figure 41. Powerhead separated from the terminal box in MM6.
Figure 42.Locations of EMC screws in MM6.
2
CAUTION! Before connecting the AC drive to mains make sure that the EMC protec-
tion class settings of the drive are appropriately made.
3
NOTE! After having performed the change write ‘EMC level modified’ on the sticker
included in the VACON
®
100 X delivery (see below) and note the date. Unless already
done, attach the sticker close to the name plate of the AC drive.
Product modified
Date:
Date:
Date:
EMC-level modified C1->C4
DDMMYY