Vacon NXP - Ius_7; Ius_8

4
vacon • 42 Service
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
4.3.2 IUS_7 / IUS_8
1
Open the cabinet door.
2
Release the drive assembly. Remove the five M8x20 bolts (tightening torque 20Nm).
Figure 27. Drive assembly mounting bolts (X)
3
Pull out the drive assembly.
Figure 28. Pulling the drive assembly out of the cabinet
4
Disconnect all cables from the drive. See Chapter 3.6.
13931_00
X
X
13932_00