Vaisala DMT152 - Connection Cables; Figure 9 Cable with Snap-On Connector; Table 5 Output Noise Minimization Wiring Option Pinouts and Wire Colors

User's Guide _______________________________________________________________________
20 ___________________________________________________________________ M210865EN-H
The wiring of pinouts 1-4 in ports I and II in the output minimization
option is described in the following table.
Table 5 Output Noise Minimization Wiring Option Pinouts and
Wire Colors
Pin
Connector I
Connector II
Wire color
1
Not wired
VDC supply+
Brown
2
Signal Ch 1+
RS-485 - / B
White
3
GND
GND
Blue
4
Signal Ch 2+ / LED
RS-485 + / A
Black
Connection Cables
The following connection cable options are available for DMT152:
- Unshielded cable with M8 female straight snap-on connector
- Shielded cables with M8 female straight threaded connector
- Unshielded cable with LED indicator for analog channel 2,
90º angled M8 female threaded connector
- USB serial interface cable
For the order codes of the cables, see section Spare Parts and Accessories
on page 65.
NOTE
Avoid using long cables (over 2
m) with voltage output.
0910-134
Figure 9 Cable with Snap-On Connector