Vaisala WXT536 - Chapter 8 Sensor and Data Message Settings; Wind Sensor; Checking the Settings (Awu)

Chapter 8 ____________________________________________ Sensor and Data Message Settings
VAISALA______________________________________________________________________ 127
CHAPTER 8
SENSOR AND DATA MESSAGE
SETTINGS
This chapter lists the sensor configuration and data message formatting
commands for all communications protocols: ASCII, NMEA 0183 and
SDI-12.
Sensor and data message settings can also be done using the Vaisala
Configuration Tool software. See Table 41 on page 180.
Wind Sensor
Checking the Settings (aWU)
With the following command you can check the current wind sensor
settings.
Command format in ASCII and NMEA 0183: aWU<cr><lf>
Command format in SDI-12: aXWU!
WXT536 WXT535 WXT534 WXT533 WXT532 WXT531
X XX