Vaisala WXT536 - Acknowledge Active Command (A); Wind Data Message (Ar1)

User’s Guide ______________________________________________________________________
90 __________________________________________________________________ M211840EN-C
Acknowledge Active Command (a)
This command checks that a device is responding to a data recorder or
another device by asking a device to acknowledge its presence on the
bus.
Command format: a<cr><lf>
The response:
a<cr><lf>
Example:
0<cr><lf>
0<cr><lf>
Wind Data Message (aR1)
This command requests the wind data message.
Command format: aR1<cr><lf>
where
a = Device address
<cr><lf> = Command terminator
where
a = Device address
<cr><lf> = Response terminator
where
a = Device address
R1 = Wind message query command
<cr><lf> = Command terminator