Vaisala WXT536 - Precipitation Counter Reset (Axzru)

Chapter 7 ___________________________________________________ Retrieving Data Messages
VAISALA_______________________________________________________________________ 85
Example (NMEA 0183):
0XZ<cr><lf>
$WITXT,01,01,07,Start-up*29
Precipitation Counter Reset
(aXZRU)
This command resets the rain and hail accumulation and duration
parameters Rc, Rd, Hc, and Hd.
Command format in ASCII and NMEA 0183: aXZRU<cr><lf>
Command format in SDI-12: aXZRU!
Example (ASCII):
0XZRU<cr><lf>
0TX,Rain reset<cr><lf>
Example (SDI-12):
0XZRU!0<cr><lf> (= device address)
Example (NMEA 0183):
0XZRU<cr><lf>
$WITXT,01,01,10,Rain reset*26<cr><lf>
where
a = Device address
XZRU = Precipitation counter reset command
<cr><lf> = Command terminator in ASCII and NMEA 0183
! = Command terminator in SDI-12