VAMP 150 User Manual

VAMP Ltd
Motor protection relay
Operation and Configuration
VAMP 150
VM150.EN005 Vamp 24h support phone : +358 (0)20 753 3264
15
4. Operating measures
General
Carefully study the operating instructions in Chapters 1
through 3 of this manual before any operating measures are
taken or before any relay settings or functions are changed.
The relay can be controlled by means of the MMI on the relay
front panel, a PC running the VAMPSET software, a PC
running suitable terminal software or a remote control system.
4.1. Operation via the local MMI
4.1.1. Measured data
The measured values can be read from the MEASURES menu
and its submenus shown in the figure below.
Figure 4.1.1-1 Measures menu of VAMP 150 relay.

VAMP 150 Specifications

General

Brand	VAMP
Model	150
Category	Relays
Language	English