VAMP 150 - Analog Output Ma OUTPUT; Service Menu SERVICE

VAMP 150 Motor protection relay
Operation and Configuration
VAMP Ltd
24
Vamp 24h support phone : +358 (0)20 753 3264 VM150.EN005
5.9. Analog output mA OUTPUT
Via the submenus of the mA OUTPUT menu the following
functions can be read and set:
• Analog output reading / editing a forced value (AO)
• Enabling / disabling of forced control of the analog output
(FORCE)
• Choosing the coupling of analog output (Link)
• Setting the coupling minimum value (Min)
• Setting the coupling maximum value (Max)
• Setting the analog output minimum value (AOmin)
• Setting the analog output maximum value (AOmax)
Available couplings to the analog output
• IL1, IL2, IL3, IL
• Io
• f
• I2/I1
• I_fault
5.10. Service menu SERVICE
Via the submenus of the Service menu the following functions
can be read and set:
Relays
• Enabling / disabling of forced control of the output relays
(FORCE)
• The status of the output relays (T1 and T2, A1 – A3 and IF)
• The forced control of the output relays (T1 and T2, A1 – A3
and IF)
Setup
• Setup of screen brightness (Bright)
• Setup of screen scroll delay (ScrlDelay)
• Changing of password (ChgPwd)
• Changing of date, time and date style (Date, Time, Style)
DeviceInfo
• Serial number of the device (SerN)
• Software version (Prgver)