USB
Service data: Description
Description of the content of the service le
Statistics section, STAT1
This contains statistical information.
Field name Translation Note
Label Field name Internal use
Actual count Number of cycles since the last reset
Total count Total amount of cycles
First occurence date / time Date and time of the rst occurrence These values may be distorted if the
main board and SD card are swapped
out.
Last occurrence date / time Date and time of the last occurrence These values may be distorted if the
main board and SD card are swapped
out.
KT temperature Core probe temperature B12.1 - B12.5 or B13.1 - B13.5
Shaft temperature Temperature of the shaft of the core
probe
B12.6 or B13.6
Pan temperature Pan temperature B1 or B2
Pan temp. max Max. pan temperature B1 or B2
Pan temp. max date / Time Date and time of recording the maxi-
mum pan temperature
Statistics section, STAT2
This contains statistical information.
Field name Translation Note
Label Field name Internal use
Min / Max Absolute pressure Min. and max.
value recorded by the unit
Statistics section, STAT3
This contains statistical information.
Field name Translation Note
Label Name of the eld Internal use
Last value Relative pressure registered before
opening of the lid
mbar
Last occurence date / time Last recorded value date & time
Min. Lowest relative pressure recorded
before lid opening
v03 • July-2016 • Hen
V.10
Communication Module
Line Units Serial number (starting from) Sw Revision
VCCM
VCCWE
All ExxXH1009xxxxxxx 01-00-10
To Next Page
Loading...