VAT 61228-KAGG-0002 - Display Information; Power up

Series 612
OPERATION
601894EA
Edition 2013-04-12
55/83
5.6 Display information
There is a 4 digit display located on
the panel. It displays configuration,
status and position information. For
details refer to following tables.
5.6.1 Power up
Description
Digit 1
Digit 2
Digit 3
Digit 4
At first all dots are illuminated
then configuration is displayed:
● Firmware version [e.g. 1E00]
(1
st
information for about 3s)
● Controller configuration
(2
nd
information for about 3s)
In case D999 is displayed, motor
interlock is active. Refer to
«Safety mode» for details.
1
E
0
0
1
= Logic interface
2
= RS232 interface
3
= RS232 interface
with analog outputs
0
= basic
1
= with SPS
1)
2
= with PFO
2)
3
= with SPS
1)
and
PFO
2)
1
= 1 sensor version
2
= 2 sensor version
SYNC indicates that powerup
synchronization is running.
S
Y
N
C
1)
SPS = optional ±15 VDC Sensor Power Supply module,
2)
PFO = Power Failure Option
Display
1 2 3 4