VAT 650 Series - Page 22

Installation, Operating & Maintenance Instructions
Series 650 DN 100-250 (I.D. 4“ - 10”), CC-Link
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
280672EB
2010-12-15
22/94
2.6.7.2 Preparing CC-Link connector
Description Required tool
1. Remove «COMBICOM» connector (A) at
valve controller
sample picture
2. Prepare all parts of connector for
installation
Note: All parts of connector are
supplemented in a plastic bag (407612),
except «COMBICOM» connector from valve
controller
2.6.7.3 CC-Link connector overview
A COMBICON D Strain-relief screw for shield mesh and cable
B CC-Link wires E Connector housing VAT
C Shield mesh F CC-Link cable
A
B
C
D
A
E
D
E
F
C