VECTRIX VX-2 SERVICE MANUAL
Version 1.0/July 2011
VECTRIX, LLC
SECTION B-13: REAR FENDER-TOP
Preparations:
Disassemble Crossover/Rear Tail Light Assembly see Section B-10
Disassemble Side Body Panels + Side Emblems see Section B-11
On the right side of the bike, unplug connectors to the Left
and Right Turn Indicators and License Plate Light
assembly
Unscrew the 3 fasteners with a 8mm open wrench
To remove the Rear Fender Splash Guard, unscrew the
two PH2 side screws
https://www.motorcycle-manual.com/
To Next Page
Loading...
