VECTRIX VX-2 SERVICE MANUAL
Version 1.0/July 2011
VECTRIX, LLC
SECTION C-14: MOTOR CONTROLLER
Open the seat and remove Cover of electronic box
Turn Key Switch to “ON” Position
Unplug blue Battery Main Connector
Turn Key Switch to “OFF” Position
Disconnect Positive Terminals first and remove Main Fuse
(1)
Then disconnect remaining (Negative) cables and wiring
harness
Unscrew the four Phillips bolts at the base of the Motor
Controller to remove the Motor Controller
https://www.motorcycle-manual.com/
To Next Page
Loading...
