VECTRIX VX-2 SERVICE MANUAL
Version 1.0/July 2011
VECTRIX, LLC
SECTION C-9: FRONT TURN INDICATOR ASSEMBLY
(Both Left and Right)
Preparations:
Disassemble Front Fairing see Section B-1
Remove all cable strips
Remove connector (2-pins) of the Turn Indicator Light
Remark: Procedure is the same for both Turn Indicator
Lights (Right and Left)
Unscrew the Nut from the inside with a wrench
Remove entire Front Turn Signal Assembly and pull cord
through the hole.
Replace entire Front Turn Signal Assembly
Remark: Since the assembly is LED, you must replace
the whole assembly.
Test function of Front Turn Indicator Light Assembly
https://www.motorcycle-manual.com/
To Next Page
Loading...
