VECTRIX VX-2 SERVICE MANUAL
Version 1.0/July 2011
VECTRIX, LLC
SECTION C-15: MOTOR
Preparations:
Disassemble Side Cover see Section B-15
Disassemble Rear Brake see Section B-16
Note: This is the same procedure to replace the Rear Brake Rotor
Open the seat and remove Cover of electronic box
Turn Key Switch to “ON” Position
Unplug blue Battery Main Connector
Turn Key Switch to “OFF” Position
For safety reasons, disconnect Positive Terminals first and
remove Main Fuse (1)
Disconnect remaining (Negative) Cables and Wiring
Harness
https://www.motorcycle-manual.com/
To Next Page
Loading...
