VECTRIX VX-2 SERVICE MANUAL
Version 1.0/July 2011
VECTRIX, LLC
SECTION C-11: REAR TAIL LIGHT ASSEMBLY
Preparations:
Disassemble Crossover Tail Light Assembly see Section B-11
Remove all cable strips
Open 3-pin connector
Unscrew the two side screws and one middle screw with
Phillips screwdriver
Replace entire Tail Light Assembly
Note: The Rear Tail Light is LED, you must replace the
whole assembly.
Test function of Brake and Position lights
https://www.motorcycle-manual.com/
To Next Page
Loading...
