VECTRIX VX-2 SERVICE MANUAL
Version 1.0/July 2011
VECTRIX, LLC
SECTION C-6: IGNITION SWITCH
Preparations:
Disassemble Front Fairing see Section B-1
Disassemble Front Console Cover see Section B-2
Disassemble Vertical Panel Cover-Lower see Section B-4
Disassemble Vertical Panel Cover-Upper see Section B-5
Remove all cable ties
Open connector
Unscrew the two fasten bolts of Key switch by 10mm
socket wrench
Test function of the Key switch
Remark: Since the ignition key and the lock for the seat are the same, it is recommended that
they be changed as a matched set. Otherwise, two different keys are necessary.
https://www.motorcycle-manual.com/
To Next Page
Loading...
