Vectrix VX-2 - Section B-16: Front Brake Master Cylinder;Line;Caliper

VECTRIX VX-2 SERVICE MANUAL
Version 1.0/July 2011
VECTRIX, LLC
SECTION B-16: FRONT BRAKE MASTER CYLINDER/LINE/CALIPER
Preparations:
Disassemble Front Fairing see Section B-1
Disassemble Front Console Cover see Section B-2
Disassemble Speedometer Cover see Section B-3
Disassemble Front Fender see Section B-7
Remove hex fastener of the hose clamp with 8mm open
wrench
Disassemble the front brake
Now it is possible to exchange the brake pads
Cut all cable ties and unplug the wiring harness of the
front brake lever switch
Unscrew both hex fasteners with an Allen key 5mm
https://www.motorcycle-manual.com/