47
VECTOR ™- USMC VECTOR 21-V.0.3
Problem Possible cause Solution
Multiple object measurement is
activated: see page 12.
The permissible angle has been
exceeded:
tilted too far upwards
tilted too far downwards
tilted too far to the right
tilted too far to the left
Distance display blinks.
These symbols are displayed
during azimuth measurement:
Click the distance key to display
distances in succession (see
page 12).
Do not over-tilt or bank the
VECTOR.
Troubleshooting (continued)
Troubleshooting
To Next Page
Loading...