Vega VEGAPULS 6X - Echo curve

108
14 Diagnosis, asset management and service
VEGAPULS 6X • Two-wire 4 … 20 mA/HART
66190-EN-221107
Code
Text message
Cause Rectication DevSpec
State in CMD 48
M507
Error in the instru-
ment settings
Error during setup
Error when carrying out a reset
False signal suppression faulty
Carry out reset and repeat setup Byte 24, Bit 7 of
Byte 14 … 24
14.4 Echo curve
14.4.1 Overview
Via the adjustment software PACTware with a PC and
VEGACONNECT the echo curve of the connected sensor can be
displayed under the menu item " Diagnosis".
The echo curve enables a detailed assessment of the characteristics
of a level measurement with the VEGAPULS 6X.
The following chapters show the basic course of the echo curve and
describe the menu functions.
14.4.2 Echo curve presentation and description
The desired individual curves are displayed on the screen in the
"Echo curve" diagram. The toolbar above is used to control the pres-
entation and navigation.