Vega VEGAPULS 6X - Supplement; Technical data

123
17 Supplement
VEGAPULS 6X • Two-wire 4 … 20 mA/HART
66190-EN-221107
17 Supplement
17.1 Technical data
Note for approved instruments
The technical data in the respective safety instructions which are included in delivery are valid for
approvedinstruments(e.g.withExapproval).Thesedatacandierfromthedatalistedherein,for
example regarding the process conditions or the voltage supply.
All approval documents can be downloaded from our homepage.
Materials and weights
Materials, wetted parts
Plastic horn antenna
Ʋ Adapterange PP-GF30 black
Ʋ Seal,adapterange FKM (SHS FPM 70C3 GLT), EPDM (COG AP310)
Ʋ Focussing lense PP
Thread with integrated antenna system
Ʋ Processtting 316L, PVDF
Ʋ Antenna PEEK
Ʋ Seal, antenna system FKM (SHS FPM 70C3 GLT), FFKM (Kalrez 6230,
Kalrez 6375 , Perlast G75B) EPDM (A+P 70.10-02)
Ʋ Process seal thread DIN 3852-A Klingersil C-4400
Flange with encapsulated antenna system
Ʋ Flange plating, antenna encapsulation PTFE, PFA
Horn antenna
Ʋ Antenna horn 316L, 1.4848
Ʋ Impedance cone Ceramic (99.7 % Al
2
O
3
)
Ʋ Seal Graphite
Hygienictting
Ʋ Hygienic antenna encapsulation PEEK
Ʋ Surface roughness of the antenna
encapsulation
R
a
< 0.76 µm
Ʋ Additional process seal depending on
thehygienictting
FKM (PPE V70SW), FFKM (Kalrez 6230, Perlast G74S),
EPDM (Freudenberg 291)
Flange with lens antenna
Ʋ Processtting 316L
Ʋ Antenna PEEK
Ʋ Seal, antenna system FKM (SHS FPM 70C3 GLT), FFKM (Kalrez 6375,
G75B), EPDM (COG AP302)
Rinsing air connection
Ʋ Flushing ring PP-GFK
Ʋ O-ring seal, purging air connection FKM (SHS FPM 70C3 GLT), EPDM (COG AP310)
Ʋ Reuxvalve 316Ti