EasyManua.ls Logo

Vega VEGAPULS 6X - Mounting instructions

Vega VEGAPULS 6X
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
5 Mounting
VEGAPULS 6X • Two-wire 4 … 20 mA/HART
66190-EN-221107
Combicompressionange
Adapterange
Combicompressionange:
Thecombicompressionangeissuitablefordierentvesselanges
DN 80, ASME 3" and JIS 80. It comes not sealed against the radar
sensorandcanthusonlybeusedunpressurized.Itcanberetrotted
oninstrumentswithsinglechamberhousing,retrottingtoadouble
chamber housing is not possible.
1
Fig.15:Combicompressionange
1 Combicompressionange
Adapterange:
TheadapterangeisavailablefromDN100,ASME3"andJIS100.It
is permanently connected with the radar sensor and sealed.
3
1
2
Fig.16:Adapterange
1 Connection screw
2 Adapterange
3 Process seal
5.5 Mounting instructions
Radar sensors for level measurement emit electromagnetic waves.
The polarisation is the direction of the electrical share of these waves.
Itisidentiablebyamarkonthehousing,seethefollowingdrawing:
Polarisation

Table of Contents

Other manuals for Vega VEGAPULS 6X

Related product manuals