Vega VEGAPULS 6X - Software update; How to proceed if a repair is necessary

119
14 Diagnosis, asset management and service
VEGAPULS 6X • Two-wire 4 … 20 mA/HART
66190-EN-221107
14.7 Software update
The device software can be updated in the following ways:
•
Interface adapter VEGACONNECT
•
Bluetooth
Depending on the method, the following components are required:
•
Instrument
•
Voltage supply
•
Interface adapter VEGACONNECT
•
Display and adjustment module PLICSCOM with Bluetooth func-
tion
•
PC with PACTware/DTM and Bluetooth USB adapter
•
Currentinstrumentsoftwareasle
Youcanndthecurrentinstrumentsoftwareaswellasdetailed
information on the procedure in the download area of our homepage:
www.vega.com.
Youcanndinformationabouttheinstallationinthedownloadle.
Caution:
Instruments with approvals can be bound to certain software versions.
Thereforemakesurethattheapprovalisstilleectiveafterasoftware
update is carried out.
Youcannddetailedinformationinthedownloadareaat
www.vega.com.
14.8 How to proceed if a repair is necessary
Youcanndaninstrumentreturnformaswellasdetailedinformation
about the procedure in the download area of our homepage. By doing
this you help us carry out the repair quickly and without having to call
back for needed information.
Proceed as follows in case of repair:
•
Printandlloutoneformperinstrument
•
Clean the instrument and pack it damage-proof
•
Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
•
Ask the agency serving you to get the address for the return ship-
ment.Youcanndtheagencyonourhomepage.