VeriFone CCV Smart VX 820 User Manual

CID086A/03012013
Page 32 of 54
5.2 Changing payment card settings
The table below lists the various changes you can make to the payment card settings, and the
information you need to make each change. The table also states the subsection in this document where
you can find detailed instructions on carrying out the change concerned.
Change Required information Subsection
Accepting a payment card
• Merchant ID of acquirer
• Transaction processor
(CCV, Equens or Atos Worldline)
5.2.1
Terminating acceptance of a
payment card
You do not need any specific information to
make this change.
5.2.2
Allocating a payment card to a
different acquirer while retaining
the current transaction processor
• Merchant ID of acquirer
• Current transaction processor (CCV,
Equens or Atos Worldline)
5.2.3
Allocating a payment card to a
different acquirer and a different
transaction processor
• Merchant ID of acquirer
• New transaction processor (CCV,
Equens or Atos Worldline)
5.2.1
5.2.1 Adding a payment card
Important: You need the Merchant ID for the payment card in order to carry out this change. You also
need to know which transaction processor will process the transactions. If you do not have this
information at your disposal, please contact your acquirer.
Complete the following steps to add a payment card:
Vx570 screen Step
1
Press the purple function key below the symbol to open
the menu.
2 Select MERCHANT MENU.
3
Enter the merchant password (the default password is 99999)
and confirm by pressing <OK>.
4 Select CONFIGURE.
5 Select C-TAP.
SALE
OTHER TRX
01.06.12
MAIN MENU
DISPLAY INFO
MERCHANT MENU
SERVICE MENU
PROTECTED ITEM
MERCHANT PASSWORD:
_ _ _ _ _
MERCHANT MENU
REPORTS
FUNCTIONS
CONFIGURE
CONFIGURE
TERMINAL
C-TAP

VeriFone CCV Smart VX 820 Specifications

General

Brand	VeriFone
Model	CCV Smart VX 820
Category	Payment Terminal
Language	English