VeriFone CCV Smart VX 820 User Manual

CID086A/03012013
Page 12 of 54
2.4.4 Assigning a dynamic IP address
If you want your payment terminal to use a dynamic IP address, you must first remove the static IP
address. Complete the following steps to remove the static IP address:
Vx570 screen Step
1
Press the purple function key below the symbol to
open the menu.
2 Select MERCHANT MENU.
3
Enter the merchant password (the default password is 99999)
and confirm by pressing <OK>.
4 Select CONFIGURE.
5 Select TERMINAL.
6 Select COMMUNICATION.
7 Select TCP / IP.
8 Select RESET ALL (DHCP).
9
Wait 30 seconds and then press <STOP> several times to
return to the start screen.
SALE
OTHER TRX
01.06.12
MAIN MENU
DISPLAY INFO
MERCHANT MENU
SERVICE MENU
PROTECTED ITEM
MERCHANT PASSWORD:
_ _ _ _ _
MERCHANT MENU
REPORTS
FUNCTIONS
CONFIGURE
CONFIGURE
TERMINAL
C-TAP
TERMINAL
COMMUNICATION
MERCHANT PASSWORD
E-JOURNAL
COMMUNICATION
SELECT MODEM
TCP / IP
TCP / IP
RESET ALL (DHCP)
STATIC IP ADDRESS
IP ADDRESS DNS1
TCP / IP
PLEASE WAIT
NOTE: THIS MAY TAKE
10 – 30 SECONDS

VeriFone CCV Smart VX 820 Specifications

General

Brand	VeriFone
Model	CCV Smart VX 820
Category	Payment Terminal
Language	English