E355/E265 USER AND BEST PRACTICES GUIDE 45
CHAPTER 6
System Mode - VTM
System Mode is also referred as Verix Terminal Manager (VTM). System mode is
used exclusively by those responsible for configuring, deploying, and managing
on-site installations. Some major functions of System Mode are software
download, debug, diagnostics, changing console settings, managing keys,
viewing system information, changing system passwords and editing
configuration parameters.
Entering and
Exiting VTM
e355 OS requires a system password each time you enter VTM, this is to prevent
unauthorized user access to VTM menus. To access the system password
screen, simultaneously press the ENTER and 7 keys. The default, factory-set
system password is "166831." Use the following key sequence to enter this
password:
1 6 6 8 3 1 ENTER
After entering the correct password, the terminal enters the VTM and displays the
main menu. You can now cycle through all VTM menus.
To exit from VTM, select 1> Restart in VTM main menu. Some operations
automatically exit VTM and restart the e355. Others require manual exit through
selection of restart.
During e355 startup, the copyright notice screen is displayed showing the OS
version, the OS build date, and Sponsor certificate name. This screen appears for
three seconds. During this time, the user can enter into VTM by simultaneously
pressing ENTER and 7 keys. User can extend the display period of this screen by
pressing any key during initial three seconds.
To Next Page
Loading...
Need help?
General
