SYSTEM MODE - VTM
Edit Parameters
48 E355/E265 USER AND BEST PRACTICES GUIDE
Figure 17 VTM Menus 3 and 4
To navigate the menus, press the numeric key beside the function that you want to
access. For example, press 6 key for page down function or 8 key for line down
function.
To go to the next menu, use DOWN icon (
) on the left side of the screen. To
return to a previous menu, use the UP icon (
).
The smaller arrows on the right side of the screen, UP () and DOWN (), are
used to select any submenu from the list. Pressing ENTER (green key) selects the
highlighted function. To return to the main menu and cancel any changes, press
the CANCEL (red key). The user can also select the item from the menu by
pressing the corresponding number key indicated at the left of the item selected.
Each menu has items to select; some items contain submenus or a series of
prompts.
Edit Parameters
This submenu provides the editor for configuration files to add or change
configuration parameters. User is prompted to select file group number and
configuration file at the beginning. The system configuration parameters of e355
are stored in CONFIG.SYS file and in group 1.
File system in Verix OS is separated into groups, applications have access to
groups 1 to 15 of file system. The system configuration parameters and
application program (*GO value) are stored in group 1.
The configuration files like CONFIG.SYS are keyed files, data is stored in key-
value pairs and in format CVLR. Configurations parameters that start with asterisk
(*) or pound (#) are retained even after memory clear.
Editing *GO
Configuration
Parameter
To edit *GO Configuration Parameter:
1 Press ENTER and 7.
2 Enter VTM's default password 166831.
3 Press ENTER.
VERIX TERMINAL MGR
1> Clock
2> Console Settings
3> Change Passwords
4> Key Management / SOP
5> ADE Management
6
7
89
ª
VERIX TERMINAL MGR
1> Software Versions
2> Power Down
689
ª
©
7
©
To Next Page
Loading...
Need help?
General
