TERMINAL SETUP
Installing the Paper Roll in the Printer
O
MNI 5XXX AND V
X
5XX/V
X
610 INSTALLATION GUIDE 19
Figure 7 V
x
610 Direct Telephone Connection
Installing the
Paper Roll in the
Printer
A fast, quiet thermal printer is built into the V
x
5xx/V
x
610 terminal. Before you can
process transactions that require a receipt or record, you must install a roll of
thermal-sensitive paper in the printer.
The ITP uses a roll of single-ply, thermal-sensitive paper 57 millimeters (2.24
inches) wide and 25 meters (82 feet) long. A pink out-of-paper indicator line
appears on the edge of the paper approximately 18 inches before the end of the
roll. After this line appears, there is enough paper remaining on the roll to
conclude at least one transaction.
WARNING
To reduce the risk of fire, use only No. 26AWG or larger UL Listed or CSA
Certified Telecommunication Line Cord.
NOTE
V
x
610 print speed varies depending on battery charge.
CAUTION
Poor-quality paper can jam the printer and create excessive paper dust. To order
high-quality VeriFone paper, refer to Accessories and Documentation.
Store thermal paper in a dry, dark area. Handle thermal paper carefully: impact,
friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper.
Never load a roll of paper with folds, wrinkles, tears, or holes at the edges.
To Next Page
Loading...
Need help?
General
