TERMINAL SETUP
Installing/Replacing the SIM Card (GSM/GPRS Models)
O
MNI 5XXX AND V
X
5XX/V
X
610 INSTALLATION GUIDE 37
4 Place the terminal onto power cradle.
Figure 36 Placing the V
x
610 Terminal Onto the Power Cradle
Installing/
Replacing the
SIM Card
(GSM/GPRS
Models)
The SIM (Subscriber Identity Module) card is a smart card inserted in the V
x
610
GSM/GPRS terminal that contains your GSM/GPRS radio account information.
Use the following procedure to replace or install a SIM card.
1 Loosen the screw from the GSM/GPRS sled module at the back of the V
x
610
terminal.
Figure 37 Loosen Retaining Screw
To Next Page
Loading...
Need help?
General
