V200T INSTALLATION GUIDE 31
CHAPTER 5
Service and Support
Maintenance
and Cleaning
The V200t device has no user-serviceable parts. Unless otherwise instructed, do
not, under any circumstances, attempt any service, adjustments, or repairs on the
unit. Disconnect the device before cleaning.
To clean the unit, periodically use a clean cloth, slightly dampened with water and
a drop or two of mild soap. For stubborn stains, use alcohol or an alcohol-based
cleaner. For best results, use a Verifone Cleaning Kit (refer to Accessories and
Documentation).
Service Returns
For V200t equipment failures that cannot be resolved by your help desk or service
department, contact one of the following hotlines for product service and repair
information:
• USA – Verifone Service and Support Group, 1-800-834-9133,
Monday - Friday, 8 A.M. - 7 P.M., EST
• International – Contact your Verifone representative
Before returning V200t unit to Verifone, you must obtain a Merchandise Return
Authorization (MRA) number. The following procedure describes how to return
one or more V200t for repair or replacement (U.S. customers only).
1 Gather the following information from the printed labels on the bottom of each
V200t device to be returned:
• Product ID, including the model and part number. For example,
“M470-xxx-xx-xxx-x”
• Serial number (S/N xxx-xxx-xxx)
2 Within the United States, call Verifone toll-free at 1-800-834-9133.
Never use thinner, trichloroethylene, or ketone-based solvents – they can
deteriorate plastic or rubber parts.
Because the V200t can be damaged by liquid, do not spray cleaners or other
solutions directly onto the keypad or display. Always apply the cleaner to a cloth
before cleaning the device.
International customers, please contact your local Verifone representative for
assistance with your service, return, or replacement.
To Next Page
Loading...
Need help?
General
